Energy Plus
6
GENERAL INFORMATION
Please do not remove the safety devices.
However, if you need to remove a device (for
good reason), you should take immediate
measures
to
prevent
possible
hazards.
In addition, it is strongly recommended
that you reinstall the protective
device removed as soon as possible.
All (ordinary and extraordinary) maintenance
procedures must always be performed with the
product isolated from the power supply.
To minimise the risk of accidental starting of a fan/
motor during maintenance, it is recommended
that you place a suitable warning sign on the
control panels/control boards, e.g.
“Attention:
Verify that the power supply is disconnected
before performing any maintenance”.
Also, before you connect a power cable to a
terminal block, check that the line voltage
corresponds to that indicated on the product
label. If the product labels become
illegible over time, please replace them.
W
A
R
N
I
N
G
!
All the internal wiring is located under the top
panel of the unit. For this reason, it is not
permitted
to
drill
holes
in
the
Panel.
To do so would involve a risk of electric shock
and damage to the unit. This also applies to
the control panel and the area of the controls.
PROVISIONS
FOR MAINTENANCE
The maintenance staff must observe all the
accident prevention (safety) regulations in force.
The following recommendations must be observed
in particular:
– wear protective clothing and appropriate
protective equipment to minimise the risk of
accidents;
– make sure that a safety interlock has been
activated to prevent unauthorised running of
the machine.
OTHER RISKS
Product-related risks were assessed as per the
machinery directive 2006/42/EC. The manual
associated with the directive contains information
and advice for all the staff on how to minimise
the risk of personal injury and damage to property.
WARNING LABELS
There are various symbols or warning
labels on the machine which must not
be removed.
DANGER LABELS
These draw attention to the presence
of live parts inside the casing on which
the label is applied.
