Energy Plus
8
USE AND PRESERVATION
OF THE MANUAL
This booklet is an integral part of the
appliance and must always accompany the
unit.
- This instruction manual is intended for the
machine’s user, the owner and installation
technician and must always be available to be
consulted, if necessary.
- The instruction manual must always be
available for consultation and be preserved in
a protected and dry place.
- The instruction manual aims to describe how
to use the machine the way the machine is
designed to be used, the machine’s technical
features and to provide information on how to
use the machine correctly, and how to the clean,
control and operate the machine; in addition, the
manual provides important information about
maintenance, any residual risks and however
how to carry out operations to be performed
with special care.
- This manual is to be considered a part of
the machine and must be PRESERVED FOR
FUTURE REFERENCE until the machine is finally
dismantled.
- The user can request a new manual from the
manufacturer or from the local retailer if the
manual is lost or damaged. The request must
include details of the machine model and the
serial number indicated on the identifying data
plate.
- This manual reflects the technical features
at the date of preparation; the manufacturer
reserves the right to upgrade the production
and the subsequent manuals without being
under an obligation to also update previous
versions.
- The manufacturer accepts no liability in the
following cases:
• improper or incorrect use of the unit;
• use that does not comply with the information
expressly specified in this publication;
• serious shortcomings in the foreseen and
recommended maintenance operations;
• changes made to the machine or any
unauthorised operation;
• using non-genuine spare parts or parts not
specific to the model;
• total or even partial non-compliance with the
• instructions;
• exceptional events.
OPERATING LIMITS
Recuperatore e Batterie Idroniche:
•
Maximum temperature of heat vector fluid:
max. 85°C
•
Minimum temperature of refrigerant fluid:
min. 6°C
• Maximum working pressure: 1000 kPa (10
bars)
• Power supply voltage: 230V - 50Hz
• Electric energy consumption: see technical
data label
• Fan motor operating limit is at -20 / +40°C
of entering air temperature
WASTE DISPOSAL
The device contains recyclable materials and
substances. It must not be disposed of with
unsorted waste but separated, recovered and
disposed of at specialised centres depending
on the type of material:
– Sheets of galvanised steel or aluzinc: sandwich
panels, fans, bulkheads, condensate drip trays,
nozzles.
– Aluminium or aluminium alloy: heat xchanger,
fins of the coil, bypass damper, motor parts.
– Copper: motor windings, coil.
– Polyurethane foam: insulation in the sandwich
panels.
– Polyethylene: insulation in the separation
panels.
– Electrical and electronic equipment: control
board and circuit boards.
Do not throw packaging material away or leave
it with in reach of children as it may represent
a hazard.
Consumables and replaced parts should be
disposed of safely and in accordance with the
environmental protection legislation.
