Energy Plus
22
ELECTRICAL PANEL
Electrical connections
The terminals in the electrical panel are used to make the electrical connections. An omnipolar circuit
breaker with a minimum contact opening gap of 3.5 mm.
• Fully disconnect the electrical power supply before
carrying out any work on the unit.
• All electrical connections of the unit should be made
by a qualified electrician.
• It is the customer's responsibility to set up
the ground connection using the installation device
of the building and a dedicated power supply
isolated and equipped with thermal protection.
• Do not connect the unit to a power supply the voltage
of which is not within the specifications.
1)
Main terminal block for use by the installer
2)
Electronic control board
3)
Fuse of the electronic power board
1
2
3