17
EN
1
GENERAL INFORMATION
Simbology
Important and/or dangerous operations
Particularly important and/or dangerous
operations
They indicate prohibited operations
Addressees
This instruction manual is intended for:
–
Owner
: person or organization owning the sy-
stem where the unit is installed; the owner is re-
sponsible for checking compliance with all the sa-
fety regulations indicated in this manual and the
regulations in force at national level.
–
Installer
: person or organization responsible for
the electrical and hydraulic installation and con-
nection, etc. in accordance with this manual and
with the regulations in force at national level.
–
Maintenance technician
: person authorized to
perform all control and maintenance operations
provided for in this manual on the unit.
–
User
: person authorized to use and operate the
unit.
Main warnings
For the fundamental safety rules, general
installation warnings and maintenance plan, see
the code 4051222 manual.
Carefully read the following user information
manual before installing and starting up the filtering
section.
The active electrostatic filtering section CdS.C
MUST be activated (power oN) once mechanically
connected to the system ducting and with active
ventilation only.
Before performing any installation or mainte-
nance operations on the filtering section disconnect
the section from the supply line.
The filtering section can not be used:
– for outdoor installation
– for installation at a room air temperature lower
than -10 °C or higher than 50 °C
– for installation in explosive atmospheres
– for installation in corrosive atmospheres
Make sure that the environment where the
unit is installed does not contain substances that
cause the corrosion of the aluminium fins.
We decline all responsibility for damage caused by
their improper use.
If in doubt, use must be agreed with the manufac-
turer. Any other or further use is considered an im-
proper use.
Proper use also includes compliance with the instal-
lation instructions described in this manual.
The installation of this product requires expertise in
the heating and air conditioning sector. This knowl-
edge, which is usually taught in professional training
in the occupational fields mentioned above, is not
described separately. Malfunction or damage due to
improper installation must be borne by the installer.
Any repair or maintenance of the filtering section
must be carried out by specialised and qualified
personnel.
We decline all responsibility for damage caused by
modifications or tampering with the unit.
during storage and installation, the products must
be protected against moisture.
don’t remove the safety labels.
Using and storing the manual
The instruction manual indicates the intended use
of the filtering section, its technical features and pro-
vides indications as to its correct use, cleaning, ad-
justments and use. It also provides important indica-
tions for maintenance, for residual risks and anyhow
to carry out operations with particular attention.
This manual is to be considered a part of the filtering
section and must be
preserved for future reference
until the unit is finally dismantled.
The manual is divided into the following sections.
–
General information
where important informa-
tion related to each phase of the life of the unit is
described (section dedicated to all recipients)
–
Installation
where all the steps to be followed by
the installer are described (installer section)
