HA016
HC165
BOOM ASSEMBLY
*Insert the tail boom assembly .
*Lock the M8 nuts with the HA016 special tool supplied (Tray 2).
*Firmly lock the lateral srews M3x12. Use Loctile for this screw and make sure you remain tight.
*Assemble the H0038 carbon security plate .
*Connect the tail servo wire to the previously fitted extension lead.
....x1
Socket Head Cap Screw
M3x6mm
(HC044-S)
Nylon Screw M8x20mm
(HC165-S)
....x2
....x2
Finishing Washer M3
Socket Head Cap Screw M3x12mm
Nylon Screws M8x20mm
Finishing Washer M3
(H0007-S)
Safety Lock Tail Boom
(H0038-S)
Socket Head Cap
Screw M3x12mm
(HC062-S)
Washer
3.1x 12x18mm
(H0078-S)
Socket Head Cap
Screw M3x12mm
(HC062-S)
Socket Head Cap Screw M3x6mm
Copyright@2013 - SAB Heli Division - All rights reserved
Page 29
Chapter 13, Installation Of The Boom
