Socket Head Cap Screw M2.5x12mm
Tail Servo Assembly
The tail servo wire lead must not be allowed to move
above this line (figure 1). To ensure this, it is necessary to
position it and then secure with hot glue in the area
indicated by the arrow. Figure 2 shows the installed servo.
Note:
Please note that the boom edges might be
rough and can eventually chafe or cut your tail servo
lead - we recommend protecting the leads with heat
shrink or even electrical tape.
Tail Assembly
Servo Spacer
(H0075-S)
Carbon Rod Assembly
(HC237-S)
Socket Head Cap
Screw M2x6mm
(HC004-S)
Tail Servo Assembly
......
x4
Socket Head Cap Screw
M2.5x12mm
......
x1
Socket Head Cap Screw
M2x6mm
......
x1
Uniball M2 5H6
15-16mm
The distance between
the axis and the ball must
be between 15-16 mm
Uniball M2 5H6
(H0064-S)
Tail Servo
Copyright@2013 - SAB Heli Division - All rights reserved
Page 28
Chapter 12, Tail Servo Installation
