Bearing 5x 9x3mm
(HC406-S)
Tail Pitch Slider 01
(H0053-S)
Bearing 5x 10x4mm
(HC411-S)
Uniball M2.5x 5H6
(H0064-S)
Spacer 5x 9x0.75mm
(H0330-S)
Tail Rotor Hub Assembly
Tail Blade Grip
Assembly
Tail Pitch Slider Link Assembly
Tail Pitch Slider Link Assembly
Tail Pitch Slider
Assembly
Buttom Head Cap Screw M4x6mm
Tail Pitch Slider Link
(H0261-S)
Tail Blade Grip
(H0327-S)
Tail Blade Grip Assembly .... x 2
(H0052-S)
Flanged Bearing
8x 12x3.5mm
(HC418-S)
Tail Pitch Slider 02
(H0053-S)
Spacer
8.1x 9.2x3.2mm
Tail Pitch Slider 03
(H0053-S)
Tail Pitch Slider Assembly
Uniball M3x3.5 5H3
(H0065-S)
Spindle Shaft
(H0329-S)
Oring
(HC335-S)
Tail Shaft
(H0325-S)
Tail Rotor Hub Assembly
Spacer 5x 9x0.75mm
(H0330-S)
Thrust Bearing
5x 10x4mm
(HC435-S)
Bearing
5x 10x4mm
(HC411-S)
Socket Head Cap
Screw M2x6mm
(HC004-S)
Buttom Head Cap
Screw M4x6mm
(HC096-S)
Note
: Smaller ID
Note
: Larger ID
Spacer
7.5x 10x0.5mm
(H0349-S)
Socket Head Cap
Screw M2x6mm
(HC004-S)
Spacer
2x 3x3mm
(H0076-S)
Note:
S >> Left Side
Note:
S >> Right Side
Socket Head Cap Screw M2x6mm
...x2
...x4
Note:
It is a normal for the tail to feel a bit tight after initial
assembly as the tail spindle preload is ussually high when
the helicopter is brand new. The preload will loosen up
after 2-5 flights allowing the system to become smooth.
Copyright@2013 - SAB Heli Division - All rights reserved
Page 24
Chapter 12, Tail
