12
240V CIRCUIT
BREAKER
240VAC
PUMP
GROUND
P U M P C O N N E C T I O N S
NOTE:
This model is factory equipped for a Single Speed pump only.
C o n n e c t i n g A 2 4 0 V A C P u m p :
Connect a 240V 30AMP Circuit Breaker for each pump (if this control box is equipped with optional pump
relays).
Using an appropriately sized copper wires connect to the outer
contacts of the JQX relays of the appropriate pumps as shown.
Run wires from the pump to the inner contacts of the appropriate
JQX relay.
NOTE:
This unit maybe equipped with more than one JQX relay
for pump control
Summary of Contents for WPC2 T Series
Page 2: ...2...
