11
E X T E R N A L M A G N E T I C A N T E N N A M O U N T I N G
The WPC-2 is equipped with an external antenna that can be mounted up to 3 meters from the
WPC-2 unit. The antenna is required as the WPC-2 enclosure is metallic and will block the RF signal
from the remote control.
The antenna has a magnetic base and may simply be placed on top of the WPC-2 enclosure.
If moving the antenna elsewhere within 3 meters is desired due to the location of the WPC-2, use the
included 90 degree, wall mounting bracket to raise or move the antenna into a clear receiving zone.
While not required, best range performance is found when the remote and the antenna are within line
of sight and 100’ or less.
NOTE:
The remote function of this device operates through radio frequency (RF) signals.
As with any RF device, this is subject to interference through surroundings and installation location.
In the event of an interference issue or if longer range is required, the 3 meter magnetically mounted
antenna may be removed and a 15 meter accessory antenna kit may be used to extend the RF antenna
towards the use area - part number
pLX-ANTKT-L
. Like any radio device, experimentation may be
required to locate the best reception or RF friendly spot.
6
NOTES: UNLESS OTHERWISE SPECIFIED.
POWDER COAT WITH LIGHT TEXTURE AT .18 .06.
1.
GRAPHICS TO BE BLACK, LOCATED AS SHOWN ON COVER SIZED APPROXIMATELY 1.75" X 8.0".
2.
GRAPHICS ARTWORK ON PAGE 3.
3.
PRETREAT MATERIAL BEFORE POWDER COATING:
4.
CLEAN, ACID BATH, DEGREASE, ZINC PLATE TO A MINIMUM THICKNESS OF 0.015MM, DEGREASE,
DRY, POWDER COAT.
POWDER COAT MUST BE FROM NAN PAO RESIN CHEMICAL COMPANY, LTD. PART NUMBER T76A4-WH003.
5.
USE TUBULAR, SOLID, RIVETS TO INSTALL HOOK TO COVER.
HINGE PIN TO BE FREE OF PAINT.
8. PAINT MUST BE RATED FOR A MINIMUM OF 300HRS SALT SPRAY TEST AND ACID RESISTANCE.
7
362.25
420
A
A
B
B
C
C
12.70
13.30
199.35
6.68
SECTION A-A
HOOK
6
200
106.59
SECTION B-B
7
7
HINGE
6
6
14.88
SECTION C-C
REFER TO PAGE 3 FOR
CORRECT DASH NUMBER
AND ARTWORK TO BE USED
±
DOOR,WPC-2/3
USED ON
APPLICATION
NEXT ASSY
APPROVALS
18GA CRS
DO NOT SCALE DRAWING
MATERIAL:
FINISH:
SEE NOTES
PURCHASING MGR:
V.P. MFG:
DIR. ENGR:
SAFETY SPECIALIST:
Q.C. MGR:
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
MODIFIED BY:
FRACTIONS
±
DECIMALS
PROJECT ENGR:
DRAWN BY:
ANGLES
±
UL FILE NO.:
B
SCALE=
SIZE
DWG NO.:
DATES
REV.
SHEET 1 OF 3
THIRD ANGLE PROJECTION
REV
A
RELEASE TO PRODUCTION.
DESCRIPTION
ZONE
ECO NO.
F0477
_
DATE
5/18/06
APPROVED
RB
REVISIONS
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
WHICH SHALL NOT BE REPRODUCED, TRANSFERRED TO
OTHER DOCUMENTS, DISCLOSED TO OTHERS, USED FOR
MANUFACTURING OR ANY OTHER PURPOSE WITHOUT
PRIOR AUTHORIZATION OF S.R. SMITH.
A. KIM
07/28/05
94-15089-00
C
1:4
.25
1
-
K.MARTIN
06/26/14
2/7/07
SC
2/21/07
RB
2/21/07
HLS
2/21/07
HLS
2/21/07
DJ
_
_
ADD -01 FOR WPC3
F0501
B
2/21/07
RB
C
485
UPDATE LOGO AND COMPANY NAME
6/28/14
BS
3 METER LONG ANTENNA CORD
Summary of Contents for WPC2 T Series
Page 2: ...2...
