EN
SV
DA
NO
FI
ENGLISH
13
The connection of the charging station and boundary wire
depends on the preferred travel direction of the mower.
When the boundary wire layout is complete, make sure
that each boundary wire is connected to the appropriate
terminal on the charging station.
CCW
CW
T2
T1
T2
T1
INSTALLING THE CHARGING STATION AND
BOUNDARY WIRE
Plan the position and placement of the charging station
and boundary wire before starting the installation process.
See the "Performing Installation Checks" section for more
information.
1. Place the charging station on a at area that is easily
accessible to a power outlet.
2. Route the boundary wire through the channel
underneath the charging pad. Measure 50 cm of wire
length from the rear side of the charging station.
50 cm
NOTE:
Make sure that the boundary wire is straight and
inside the channel.
3. Attach the cable connector at the end of the boundary
wire. Secure the connector using pliers, breaking the
plastic sleeve of the wire. Cut the excess length of the
wire.
1
2
3
1-2 cm
Connect the boundary wire to the charging station. For
clockwise mower direction, connect the boundary wire to
terminal 2 (T2). For counterclockwise mower direction,
connect the boundary wire to terminal 1 (T1).
CW
CCW
T1
T2
4. Secure the charging pad using the charging station
screws.
1
2
5. Secure the boundary wire at the end of the charging
pad using a peg.
Summary of Contents for ROBOYAGI RY36LMRX
