ENGLISH
10
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise during use and
the operator should pay special attention to avoid the
following:
Ŷ
injury from contact with the blades
Ŷ
injury caused by thrown objects
PERFORMING INSTALLATION CHECKS
See pages 112 - 117.
MAIN COMPONENTS
1. MOWER
The product mows the lawn autonomously within a
perimeter set by the boundary wire.
2. BATTERY PACK
The product is powered by a 36 V battery pack.
3. CHARGING STATION
The product recharges its battery pack at the charging
station. The product returns to the charging station
when the mowing is done or the battery pack needs to
be recharged.
The two parts of the charging station are the charging
port and charging pad. The charging port connects to
the charging socket of the product when the product
is docked.
The charging station must be placed on a levelled
ground, protected from sprinkler systems, rain, snow,
and direct sunlight.
If the charging station cannot be placed under a shade,
purchase the roof accessory to protect the charging
station from direct sunlight. The battery does not charge
if its temperature exceeds 45 °C. Allow the battery to
cool down to resume charging.
4. TRANSFORMER
The transformer is a 42 V, 3 A DC power adapter. It is
connected between the charging station and a 220 V –
240 V power supply.
The transformer must be placed near the charging
station, protected from sprinkler systems, snow, and
direct sunlight.
5. BOUNDARY WIRE
The boundary wire is laid in a loop around the work area
of the mower. The boundary wire is also set around
the edges of the lawn, ornaments, plants, and other
obstacles that the mower must avoid during operation.
ACCESSORIES
6. CHARGING STATION SCREWS
The charging station screws hold the charging station
in place.
7. PEGS
The pegs are used to hold the boundary wire in place.
8. WIRE CONNECTORS
The wire connectors are used to connect the boundary
wire and the charging station.
9. COUPLERS
The couplers are used to connect two lengths of the
boundary wires.
10. SLOTTED SCREWDRIVER
A slotted screwdriver is shipped with the product for
installation and removal purposes.
WARNING!
To ensure trouble-free installation and
operation of your ROBOYAGI, ensure that any other
ROBOYAGIs in lawns next to yours are turned o
ႇ
until your
ROBOYAGI is successfully installed.
CHARGING STATION PLACEMENT
Ŷ
Place the charging station on a levelled ground and
ensure that no objects or obstructions are in the
immediate vicinity.
Ŷ
Protect the charging station from water sprinkler
systems.
Ŷ
Protect the charging station from direct sunlight.
Ŷ
The charging station must not be positioned in a way
that its charging pad is bent.
Ŷ
The charging station must not be placed on a de ned
obstacle as this limits the optimal operation of the
boundary wire.
Ŷ
Position the charging station in a spot close to a power
outlet.
Ŷ
Mount the charging station to the ground using the
supplied charging station screws. Ensure that the
screws are securely tightened all the way down in the
countersink. If the charging station is placed against a
wall, connect all the wires before securing the charging
station to the ground.
Ŷ
Position the charging station to allow a minimum of 1 m
of free space in front of it.
Ŷ
Position the charging station to allow a minimum of 30
cm of free space behind it. If the charging station is
placed in a corner, extend the wire 15 cm at a 45° angle
to create a curve.
45 cm
1 m
44
30 cm
45 cm
15 cm
Summary of Contents for ROBOYAGI RY36LMRX
