ENGLISH
8
CHARGING STATION SAFETY WARNINGS
Ŷ
The ROBOYAGI is powered by a detachable battery.
To recharge the battery, use only the detachable power
supply unit provided with the product.
Ŷ
Power plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodi ed plugs and
matching outlets will reduce the risk of electric shock.
Ŷ
Electrical power should be supplied via a residual
current device (RCD) with a tripping current of not more
than 30 mA.
Ŷ
Before use, check the supply and extension cord
for signs of damage or aging. If the cord becomes
damaged during use, disconnect the cord from the
supply immediately. Do not touch the cord before
disconnecting the supply. Do not use the product if the
cord is damaged or worn.
Ŷ
If you need to use an extension cord, ensure it is
suitable for outdoor use and has a current capacity
rating su
ႈ
cient to supply your product. Check the
extension cord before every use for damage. Always
uncoil it during use because coiled cords can overheat.
Damaged extension cord should not be repaired. They
should be replaced with an equivalent type.
Ŷ
Make sure the power cord is positioned so that it cannot
be damaged by the blades and will not be stepped on,
tripped over, or subjected to damage or stress.
Ŷ
Never pull the product by the power cord to disconnect
from the power supply.
Ŷ
Keep the power cord away from heat, oil and sharp
edges.
Ŷ
Make sure the voltage is correct for your product.
A rating label on the product indicates the product’s
voltage. Never connect the product to an AC voltage
that di
ႇ
ers from the voltage indicated on the rating
label.
LAWN MOWER SAFETY WARNINGS
Ŷ
Perform weekly visual inspections to ensure blades,
blade bolts, and cutter assembly are not worn or
damaged.
Ŷ
Replace worn or damaged blades and bolts in sets to
preserve balance.
Ŷ
The blade on the product is sharp. Use extreme caution
and wear heavy-duty gloves when tting, replacing,
cleaning, or checking bolt security.
Ŷ
Bring the product to an authorised service centre to
replace damaged or unreadable labels.
Ŷ
Replace worn or damaged parts before operating the
product.
Ŷ
Never start the product if the hands and feet of all
persons are not clear of the cutting enclosure.
Ŷ
Do not use the product if the master switch does not
turn it on or o
ႇ
.
Ŷ
Never attempt to lock the master switch in the on
position; this is extremely dangerous.
Ŷ
Never use the product with defective guards or shields,
or without safety devices in place.
Ŷ
Never use the product without the battery pack cover
securely in place.
Ŷ
Turn on the product carefully according to instructions,
and keep hands and feet away from blades. Do not put
hands or feet near or under rotating parts.
Ŷ
Never pick up or carry the product while it is running.
Ŷ
Turn o
ႇ
the master switch and remove the battery
pack. Make sure that all moving parts have come to a
complete stop:
Ɣ
before clearing blockages or unclogging
Ɣ
before checking, cleaning, or working on the
product
Ɣ
after striking a foreign object (inspect the product
for damage and make repairs as necessary before
restarting and operating the product)
Ŷ
If the product starts to vibrate abnormally (check
immediately)
Ɣ
inspect for damage, particularly the blades
Ɣ
replace or repair any damaged parts
Ɣ
check for and tighten any loose parts
Ŷ
Do not use the product simultaneously with the sprinkler
systems.
Ŷ
Do not use the product when it is snowing.
Ŷ
Never touch exposed terminals at all times.
PRODUCT FEATURES
The mower is equipped with several sensors that protect
both the mower and the user. Bump sensors, lift sensors,
area sensors, a tilt sensor, and a charging station sensor
are built-in safety features of the mower. The mower also
has a built-in alarm that alerts the user when the mower is
in a fault state and requires the security PIN to be entered.
The automatic height adjustment feature of the mower
allows the user to automatically set the cut height from 20
mm to 60 mm.
BUMP SENSORS
The bump sensors detect when the mower bumps into
an obstacle. When the sensors are activated, the mower
stops, backs o
ႇ
, and then turns to continue in a di
ႇ
erent
direction. If the bump sensors do not reset fully, the mower
shakes itself to free up the sensors.
LIFT SENSORS
The lift sensors detect when the mower is lifted from
the ground during the operation. When the sensors are
activated, the blade stops immediately and the wheels
vibrate for 3 seconds.
AREA SENSORS
The area sensors keep the mower within the de ned
boundary by sensing the proximity of the mower to the wire.
TILT SENSOR
The tilt sensor detects when the mower is tilted in relation
to the horizontal plane. When the mower is tilted to 25°, the
sensor is activated and stops the wheel and blade.
Summary of Contents for ROBOYAGI RY36LMRX
