Ryobi RJS18, Manual

Page: 3 / 88

Safety, performance, and dependability have been given
top priority in the design of your jigsaw.
INTENDED USE
The jigsaw is intended to be used only by adults who have
read and understood the instructions and warnings in this
manual, and can be considered responsible for their actions.
:LWKDSSURSULDWHEODGHV¿WWHGWKHSURGXFWLVGHVLJQHGWRFXW
wood, plastic, drywall, and metal up to the depth described
LQWKHVSHFL¿FDWLRQWDEOH
The product is designed for handheld use. The product is not
WREHPRXQWHGRQWRDZRUNEHQFKXQOHVVVSHFL¿FLQVWUXFWLRQV
about how to do this are given by the manufacturer of the
product.
Do not use the product for any other purpose. Use of the
SURGXFWIRURSHUDWLRQVGLႇHUHQWIURPLQWHQGHGFRXOGUHVXOWLQ
a hazardous situation.
WARNING! Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool.
Failure to follow all instructions listed below
PD\UHVXOWLQHOHFWULFVKRFN¿UHDQGRUVHULRXVLQMXU\
Save all warnings and instructions for future reference.
JIGSAW SAFETY WARNINGS
Ŷ
Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring.
Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
Ŷ
Use clamps or another practical way to secure and
support the workpiece to a stable platform.
Holding
the workpiece by hand or against your body leaves it
unstable and may lead to loss of control.
Ŷ
Ambient temperature range for tool during operation is
between 0°C and 40°C.
Ŷ
Ambient temperature range for tool storage is between
0°C and 40°C.
Ŷ
The recommended ambient temperature range for the
charging system during charging is between 10°C and
38°C.
ADDITIONAL SAFETY WARNINGS
Ŷ
Dust may enter the eyes or respiratory system. Wear
eye protection at all times. Wear appropriate dust control
mask with filters suitable for protecting against particles
from the material being cut. Do not eat, drink, or smoke
in the work area. Ensure adequate ventilation.
Ŷ
Take care when blind-cutting into walls and floors where
cables may be hidden.
Ŷ
The blades are very sharp and will become hot during
use. Wear gloves when changing blades. Keep hands
away from the cutting area at all times.
ADDITIONAL BATTERY SAFETY WARNINGS
Ŷ
To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your
tool, battery pack or charger in fluid or allow a fluid to
flow inside them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a short
circuit.
Ŷ
Ambient temperature range for battery during use is
between 0°C and 40°C.
Ŷ
Ambient temperature range for battery storage is
between 0°C and 20°C.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or
tape. Do not transport batteries that are cracked or leaking.
Check with the forwarding company for further advice.
KNOW YOUR PRODUCT
See page 56.
1.
/RFNRႇEXWWRQ
2. Trigger switch
3. Handle, insulated gripping surface
4. Battery port
5. Orbital adjustment knob
6. Hex key
7. Base assembly
8. Blade release lever
9. Blade guard
10. Blade
11. Operator’s manual
12. Battery pack
13. Charger
MAINTENANCE
Ŷ
The product should never be connected to a power
supply when assembling parts, making adjustments,
cleaning, performing maintenance, or when the product
is not in use. Disconnecting the product from the power
supply will prevent accidental starting that could cause
serious injury.
Ŷ
When servicing, use only original manufacturer’s
replacement parts, accessories and attachments. Use
of any other parts may create a hazard or cause product
damage.
Ŷ
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.
Ŷ
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
Ŷ
For greater safety and reliability, all repairs should be
performed by an authorised service centre.
ENGLISH
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
3
Original Instructions