![background image](http://html1.mh-extra.com/html/ryobi/ems216l/ems216l_original-instructions-manual_1506457005.webp)
English
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
EL
TR
3
Ŷ
Do not use cracked or distorted saw blades. Do not use
saw blades that are damaged or deformed.
Ŷ
Scrap the saw blade if damaged, deformed, distorted or
cracked, repairing is not permitted.
Ŷ
Do not use HSS blades.
Ŷ
Ensure the saw blade is mounted correctly, tighten
the arbor nut securely before use. (tightening torque
approx. 12-15 Nm).
Ŷ
Fastening screws and nuts shall be tightened using the
appropriate spanner.
Ŷ
Extension of the spanner or tightening using hammer
blows is not permitted.
Ŷ
Make sure the blade and flanges are clean and the
recessed sides of the collar are against the blade.
Ŷ
Make sure the blade rotates in the correct direction.
Ŷ
Before work, make a dummy cut without the motor
turned on so the position of the blade, operation of the
guards with respect to other machine parts and work
piece may be checked.
Ŷ
Never leave the machine unattended.
Ŷ
Do not apply lubricants on the blade when it is running.
Ŷ
Never perform any cleaning or maintenance work when
the machine is still running and the head is not in the
rest position.
Ŷ
Never attempt to stop a machine in motion rapidly
by jamming a tool or other means against the blade,
serious accidents can be caused unintentionally in this
way.
Ŷ
Disconnect the saw from the mains supply before
changing blades or carrying out maintenance.
Ŷ
Pay attention to blade packing and unpacking, it is easy
to be injured by the sharp blade tips.
Ŷ
Use a blade holder or wear gloves when handling a saw
blade.
Ŷ
Keep and store the blade in original packaging or other
suitable packaging, keep in dry conditions and away
from chemicals which may damage the blade.
LASER SAFETY RULES
Ŷ
The laser radiation used in this saw is Class 2 with
PD[LPXPP:DQGQPZDYHOHQJWKV'RQRWVWDUH
into the laser beam. Failure to comply with the rules
could result in serious personal injury.
Ŷ
We have supplied you with an adhesive label in your
language and now request that you please apply this
over the top of the existing English language label
that is located on the side of the tool prior to first
commissioning the machine.
Ŷ
Do not stare into beam during operation.
Ŷ
Do not project the laser beam directly into the eyes of
others. Serious eye injury could result.
Ŷ
Do not place the laser in a position that may cause
anyone to stare into the laser beam intentionally or
unintentionally.
Ŷ
Do not use optical tools to view the laser beam.
Ŷ
Do not operate the laser around children or allow
children to operate the laser.
Ŷ
Do not attempt to repair the laser device by yourself.
Ŷ
Do not attempt to change any parts of the laser device
by yourself.
Ŷ
Any repairs must only be carried out by the laser
manufacturer or authorized service agent.
Ŷ
Do not replace the laser with a different type.
INTENDED USE
Ŷ
The mitre saw can be used for sawing solid wood,
bonded wood, glued veneer, materials similar to wood,
and plastics.
Ŷ
Do not use this product in any other way as stated for
normal use.
RESIDUAL RISKS
Even when the machine is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
Ŷ
Risk of contact with uncovered parts of the rotating saw
blade.
Ŷ
Kick-back of work pieces and parts of work pieces due
to improper adjustment or handling.
Ŷ
Catapulting of faulty carbide tips from the saw blade.
Ŷ
Damage to respiratory system if effective dust mask is
not worn.
Ŷ
Damage to hearing if effective hearing protection is not
worn.
MAINTENANCE
Ŷ
Do not make any adjustments while the motor is in
motion.
Ŷ
Always make sure the machines plug has been removed
from the mains power source before changing brushes,
lubricating or when doing any works or maintenance on
the machine.
Ŷ
After each use, check your machine for damage or
broken parts and keep it in top working condition by
repairing or replacing parts immediately.
Ŷ
The blade being hot after use, keep the alertness during
maintenance or cleaning procedures.
Ŷ
Clean out accumulated dust.
Ŷ
To assure safety and reliability, all repairs with the
Summary of Contents for EMS216L
