Ryf Ryeco RMM2010-CNC, Operating Instructions Manual

Page: 22 / 24

Operating Instructions Ryeco RMM2010 - CNC
9 Disassembly, storage, disposal
9.1 Disassembly
The disassembly must only be carried out by specialized staff who are trained and qualified for this task.
Personal protective equipment must be worn.
• Laws, regulations and provisions, as well as the safety guidelines in these instructions must be observed.
• The measurement device must be shut down and secured against accidental start-up before disassembly.
• The measurement device must be disconnected from all supply lines.
• When handling operating and auxiliary materials, the product-specific safety guidelines and safety data
sheets for the operating and auxiliary material must be observed.
9.2 Storage
The following regulations apply to the storage of measurement devices:
• Store in a dry location. Maximum relative air humidity: 50 – 70%.
• Do not store outdoors.
• Protect against direct sunlight.
• Store in a dust-free location.
• Protect stored components against mechanical vibrations and damage.
9.3 Disposal
To avoid unnecessary remnants, recycling assemblies and individual parts of Ryeco / Ryf Ltd, Messtechnik
products is preferable to disposal.
Mechanical or electric replacement parts should be overhauled and reused. Operating and auxiliary
materials and any replacement parts, that can no longer be used, should be disposed of safely and in an
environmentally friendly way observing relevant specifications, including applicable internal regulations. The
provisions of the Waste Management and Product Recycling must be observed.
10 Wear parts, spare parts and accessories
Please note that wear parts, spare parts and accessories that are not supplied by us, have also
not been tested or approved by us. The installation and/or use of such components may therefore
change the specified characteristics of your product. Ryf Ltd. is not liable for any damage caused by the
installation and/or use of non-original parts. We recommend that you always consult Ryf Ltd first if you
encounter any difficulties when installing or disassembling wear parts, spare parts or accessories.