Operating Instructions Ryeco RMM2010 - CNC
1 General information
1.1 Introduction
These operating instructions contain important information regarding the safe and intended
use of a measurement device used for the optical or optical-tactile multi-sensor coordinate
measurement of workpieces that are suitable based on their characteristics, such as size, weight
and material.
The instructions are intended to help avoid hazardous situations, to prevent accidents and to
protect the system from damage due to improper conduct of personnel. The operating instructions
are aimed at all persons who operate the system or complete any mainten-ance or servicing work
on the system.
1.2 Target group
These operating instructions are only aimed at trained personnel and specialized staff with relevant
training by Ryf Ltd.in the respective area of activity. For more information see
1.3 Limitation of liability
All of the information and instructions in these operating instructions have been compiled taking
into account the applicable standards and regulations, the state-of-the-art, as well as our long-
standing knowledge and experience.
Ryf Ltd. reserve the right to implement technical changes within the scope of the ongoing
development of the product described in these operating instructions without prior notice. The
details,figures and descriptions in these operating instructions therefore only serve as indicative
information. The illustrations provided in these operating instructions also do not necessarily
correspond to the scope of delivery or any spare parts supplies. The drawings and figures are not
drawn to scale.
Ryf Ltd. shall not assume liability for damages and malfunctions caused by the following
circumstances:
• Operating errors
• Non-compliance with the documentation
• Non-intended use of the measurement device
• Deployment of personnel who are not trained for the corresponding task
• Repairs that have not been completed professionally
• Failure to complete or incorrect maintenance work
• Unauthorized technical changes
• Use of spare parts and accessories that have not been approved by Ryf Ltd. Switzerland
• Use of unsuitable or unauthorized operating materials
• Operation using faulty, non-functional or bypassed safety and monitoring equipment
• Incorrect connection or preceding work that is not included in the contractually agreed
• Retrofitting and/or other structural changes to the measurement device, if and to the extent that
they have not been expressly approved by Ryf Ltd. Switzerland in writing.
A warranty is not expressly granted.
Summary of Contents for Ryeco RMM2010-CNC
