sAFEtY CONsiDERAtiONs
the machine is intended to be operated by qualified personnel who are familiar with relevant safety
requirements. safety equipment necessary for the prevention of accidents at the mounting and
operation of machine shall be applied at all times.
it is the duty of the safety officers in charge to make sure that all personnel operating the machine meet
these demands.
the machine operates using air power. the transmission of these powers to the mechanical drum
represents a certain danger and must be maintained continuously.
• It is advised to wear ear protection when operating machine.
• It is advised to use air filters and lubricators on the air supply when applicable.
• Always make sure the equipment on machine is in good condition.
• Always disconnect the air supply when maintaining or working on the machine.
• Use only original
Rustibus®
spare parts on the machine.
•
ALWAYS THINK SAFETY FIRST WHEN OPERATING MACHINE.
bEFORE stARtiNG tHE OPERAtiON
Congratulations on your new
Rustibus®
de-scaling machine. in order to ensure your full benefit and
safety of operation we recommend you to read this operation manual carefully before starting.
Always lift up machine in order for chain drum to rotate freely when starting the machine.
(i)
Make sure all safety measurements are being considered.
(ii)
Confirm correct air pressure before connecting hose to supply.
(iii)
Check oil level container for the air powered machine if applicable.
(iv)
start and stop the machine and check that rotation is correct according to marking on machine.
(v)
Make sure the air hose is properly connected and safely located for your operation.
(vi)
scaling can start. Run machine forward and backward to achieve the best result.
(vii)
Do not run machine over sharp edges, but along these. the chain drum will last longer by
working the machine with care.
(viii) When only two links are left on the chains, the drum should be removed from machine for
replacement of chains.
Genuine Rustibus® parts only!
Machine may vary from pictures
Summary of Contents for 040-X3000
Page 1: ...040 X3000 Rustibus X400 AIR Ex Certified OPERATION MANUAL ...
Page 29: ......
Page 30: ......
Page 31: ......
