iNstALLAtiON AND sEtuP
Step 5: MAINTENANCE OF RUSTIBUS® MACHINE.
•
ALWAYS
stop the machine and disconnect it from its air power source before carrying out any
maintenance on the machine.
• When only two links are left on the chains, the drum should be removed from machine for replacement
of the chains
•
Never use a hammer on the shaft, body or connections of the motor or any other part of the
machine.
• When the machine is stowed away after use, the motor should be filled with 0,1 litre (3.38 US fl oz) of
lube oil to ensure functionality upon next time of use. On upright machine fill at filling cap. On the
LOW
machine, place machine on its right side, detach air hose connection from motor and fill the motor.
On both machines you should turn the motor twice to circulate the oil.
•
All maintenance on the machine/tool should be carried out in an area/environment that is safe /free
from potentially explosive oils, acids, gases, vapors or radiation. Only conduct maintenance on your
machine in an area that is safe to do so.
• ALL SPARE PARTS INTENDED FOR USE ON THIS RUSTIBUS MACHINE MUST BE GENUINE RUSTIBUS
SPARES TO MAINTAIN THE ATEX (Ex) CERTIFICATIONS.
• USE OF NON GENUINE RUSTIBUS SPARES WILL BE CONSIDERED A MISUSE AND IN BREACH OF THE
ATEX REGULATIONS AND A BREACH OF GUARNTEE/WARRENTY.
ENSURE THAT THE RUSTIBUS® IS EARTHED
Attach an earthing cable to the machine by securing it in position on the earth connection: positioned
and marked on the handle of the machine. this will ensure proper contact with the body of the tool.
then attach/secure the opposite end of your earthing cable to a solid and grounded structure, ensuring
proper contact.
THE EARTHING OF THE TOOL SHOULD BE CHECKED, TESTED AND ASSURED BY A PERSON WHO IS
QUALIFIED TO DO SO!
Genuine Rustibus® parts only!
Machine may vary from pictures
Summary of Contents for 040-X3000
Page 1: ...040 X3000 Rustibus X400 AIR Ex Certified OPERATION MANUAL ...
Page 29: ......
Page 30: ......
Page 31: ......
