Rustibus 040-X3000, Operation Manual

Page: 25 / 31

spare part list – Rustibus® 2000-3000.
SCENARIOS POTENTIAL
REASONS
SOLUTIONS
Rustibus®
machine
Does not run.
- Dirt, foreign materials
- internal corrosion / rust
- Misalignment
- Poor lubrication
- Jammed machine
1)Check that there are no restrictions on
the hose.
2) Check the Psi meter on the Air Lubriction
system for adequate pressure.
3) Check air supply.
4) Disconnect air power supply from
machine / tool, remove the screen and
chain Drum unit from Machine / tool and
check if main drive shaft rotates freely.
5) too much dust may have accumulated in
the tool. Clean the tool.
6) Check the bearings to make sure they are
spinning freely in their track.
Air motor failure (handle part) such as
main gear not engaging. Contact
supplier for service.
7) Lubricate the machine and rotate the
chain head or drive shaft in both
directions a few times.
Rustibus®
machine
runs at reduced
speed.
- Dirt, foreign materials
- internal corrosion / rust
- Misalignment
- Insufficient air pressure / flow
- Air hose or compressor is to small
- Restricted exhaust
- Poor lubrication
- Air hose between machine and
compressor is to long
Rustibus® machine
runs with low torque.
- Dirt, foreign materials
- internal corrosion / rust
- Misalignment
- Insufficient air pressure / flow
- Poor lubrication
- Jammed machine
Machine reduces
speed during opera-
tion
- Misalignment
- Restricted exhaust
- Jammed machine
- Compressor is to small
- Air hose between machine and
compressor is to long
1) Disconnect machine from air power
supply and check that exhaust is not
restricted.
2) Check air supply is not restricted and
that it is adequate.
Not getting good
enough de-scaling
performance
- Machine running to slow
- Chain drum is worn out
1) Check that air supply is free of
restrictions and that it has the adequate
Psi.
2) Disconnect the air supply and check if
the chain drum is worn and replace if
necessary.
unfamiliar smells or
sounds coming from
machine.
- Misalignment
- Poor lubrication
- Jammed machine
- Dirt, foreign materials
1) Disconnect machine from air power
supply.
2) Carefully inspect machine / tool.
Genuine Rustibus® parts only! Machine may vary from pictures