Rustibus 040-X3000, Operation Manual

Page: 13 / 31

GENERAL MAiNtENACE
the lubricator should be set to approx. 10 drops of oil pr. min.
(Adjustment screw is located on top of the lubricator)
When using the machine make sure that the lubricator is always filled with air tool oil. Refill when
necessary.
REMOViNG tHE LubRiCAtOR OR FiLtER
the air filter will separate water from the pressured air and collect water in filter tank. the water must be
drained from the air filter tank when required. Empty the tank by pushing the knob sideways at the tank
bottom.
When the
Rustibus® X
400 Air is stowed away after use, it should be filled with 0,1 litres of lube oil to
ensure functionality upon next time of use. Fill the oil into the t-pipe (040-4021) by removing the cap
(040-4020). Gently rotate the scaling head 2-3 times to make sure the oil lubricates the air motor. see
spare part drawing for further details.
CAUTION!
DisCONNECt tHE AiR PREssuRE HOsE WHEN MAiNtENANCE OR sERViCE is tO bE CARRiED Out ON
tHE MACHiNE.
Removing the Lubricator or Filter on your machine could not be easier, if you follow the a,b,c
method shown in these pictures it can be carried out in a careful way.
a, PREss bLACK buttON DOWNWARDs
b, tWist bAsE CLOCKWisE
c, PuLL LOWER sECtiON DOWNWARDs.
to replace the bowl simply reverse the method with which you removed it.
Genuine Rustibus® parts only!
Machine may vary from pictures