Russound SMC-30 Installation Manual Download

Page: 41 / 144

Smart Media Console Installation Manual

Audio

Connecting Audio

Introduction

This chapter covers how to connect the Smart Media Console’s (SMC) audio

inputs and outputs to audio sources and systems� Refer to Ch� 2

Smart Media

Console Package Contents

for information on cables and cable accessories for

connecting audio equipment�

Audio Output Connectors

The SMC’s rear panel has separate analog audio output connectors and one

optical digital audio output connector (S/PDIF)�

The rear panel

•

analog

audio output connectors are mini-stereo jacks that

connect from SMC’s rear panel to an audio/video (A/V) receiver, powered

speakers, monitor speakers or TV�

The rear panel optical digital audio output connection accepts a special

•

TOSLINK optical cable (S/PDIF)�

Note:

Use the analog audio OR optical digital audio out connections, but

NOT both�

If the audio equipment you are using has multiple input and output connections,

it will also have front panel input and output switches which will need to be set

correctly to play audio from the SMC�

Summary of Contents for SMC-30

















































































































































Search results

Summary of Contents for SMC-30

Reviews:

Related manuals for SMC-30

Brands by name

Popular brands

Russound SMC-30, Installation Manual

Search results

Summary of Contents for SMC-30

Reviews:

Related manuals for SMC-30

Brands by name

Popular brands