Rural King RK37 Hydrostatic Operator'S Manual Download Page 95

Page: 95 / 182

5 -

Maintenance and service

Opening hOOd

①

Slide the hook to the side. Then,

the hood opens with a clicking

sound.

►

1. Opening cOvers

To prevent any possible failure,

some items should be checked

daily.
Make sure to perform inspection be-

fore driving.

inspectiOn iteMs

Inspect each part in the following

order:

►

2. inspectiOn iteMs

①

Check the items that were

faulty yesterday.

②

Go around the tractor and

check:

- Lamps for proper illumina-

tion and damage

- Tires for inflation pressure,

crack, damage and wear

- Rotating parts for loose

bolts and nuts

- Transmission fluid level

- Implement attachment sta-

tus

Maintenance and service

T39O501A

Hand Hook

RK3O501A

②

Lift the hood with hands. Then,

the hood is automatically opened

and fixed by its damper.

Hood

RK37S,RK37SC-영문-05(마).indd 2

2018-12-11 오전 8:47:27

Summary of Contents for RK37 Hydrostatic























































































































































































Search results

Summary of Contents for RK37 Hydrostatic

Reviews:

Rural King RK37 Hydrostatic, Operator'S Manual, Page: 95 / 182

Search results

Summary of Contents for RK37 Hydrostatic

Reviews: