Rural King RK37 Hydrostatic Operator'S Manual Download

Page: 130 / 182

6 - 13

CABIN SYSTEM

436

CHECkINg THE AIR CONdI-

TIONINg SYSTEM

Economic friendly refrigerant :

R134a (0.7

∼

0.85Kg)

The presence of air and water in the

system could jeopardize its efficien

cy.



The air is uselessly compressed

by the compressor and no cooling

effect is produced.



The moisture has a tendency rise

to obstructions which prevent the

cooling efficiency.

Check belt tension;

when finger pressure is applied to

the mid-point between both pul-

leys.

Condenser fins must always be

duly clean using water or an air

set.

►

CHECkINg THE AIR CONdI-

TIONINg SYSTEM CHARgE

1.Check the refrigerant charge.



Run the engine at 1,500 rpm.



Set the air conditioning system

in the coldest for 5 minutes.



Check the sight glass dear or

cloud.

►

2. Check the refrigerant with receive

drier sight glass.

If the air-con. is operated with

not charged.

The lubrication in the compres-

sor can cause the damage.

•

CAUTION

RK37S,RK37SC-영문-06(바).indd 13

2017-01-13 오전 10:49:20

Summary of Contents for RK37 Hydrostatic























































































































































































Search results

Summary of Contents for RK37 Hydrostatic

Reviews:

Related manuals for RK37 Hydrostatic

Brands by name

Popular brands

Rural King RK37 Hydrostatic, Operator'S Manual

Search results

Summary of Contents for RK37 Hydrostatic

Reviews:

Related manuals for RK37 Hydrostatic

Brands by name

Popular brands