Rural King RK37 Hydrostatic Operator'S Manual Download

Page: 107 / 182

5 - 1

Maintenance and service

10. checking hOses

Rubber parts, such as the fuel hose

and radiator hose, are aged by time

even when the tractor is not in use.

Therefore, such parts should be

replaced with their tightening bands

every years or when they are

damaged.

If any fuel hose is damaged,

fuel leaks and it can catch fire.

Make sure to check the fuel

hose and take a necessary ac-

tion.

•

Warning

11. checking electric systeM

When charging the battery af-

ter removing it from the tractor,

it produces hydrogen gas, pre-

senting a fire risk. Charge the

battery only in a well-ventilated

area.
The battery produces highly

flammable hydrogen gas

which can explode. Keep flam

mable items and spark away

from the battery.
The battery electrolyte is sulfu-

ric acid so can burn your skin

and eyes. Be careful not to

spill any.

•

danger

checking and charging battery

►

If the battery electrolyte gets

on your eyes, skin, clothes

or object, rinse it with water

thoroughly. If you swallowed it,

drink a lot of water. Also, get

medical attention immediately

if acid contacts your eye or is

swallowed.

•

danger

RK37S,RK37SC-영문-05(마).indd 14

2018-12-11 오전 8:47:46

Summary of Contents for RK37 Hydrostatic























































































































































































Search results

Summary of Contents for RK37 Hydrostatic

Reviews:

Related manuals for RK37 Hydrostatic

Brands by name

Popular brands

Rural King RK37 Hydrostatic, Operator'S Manual

Search results

Summary of Contents for RK37 Hydrostatic

Reviews:

Related manuals for RK37 Hydrostatic

Brands by name

Popular brands