Rural King RK37 Hydrostatic Operator'S Manual Download

Page: 127 / 182

6 - 10

CABIN SYSTEM

HEATINg SYSTEM CONFIgU-

RATION

The heating system consist of two

units:

1. Heater and blower unit installed

behind roof console.

2. Power supplying set, consisting

of an auxiliary alternator locat-

ed front of the engine and driven

by a belt directly linked to the en-

gine pulley.

If the air does not come out from

the diffusers right away as soon

as the system is started, turn off

immediately and identify the fault.

※

N.B: Never turn on the heating

system when working in

dusty environments.

►

HEATINg AIR CONdITIONER

SYSTEM

The system is designed to ensure

optimum temperature inside the cab

and maximum comfort and safety

for the operator.

However, it is advisable to consult

our specialized workshops whenev-

er repairs or adjustments need to be

performed.

Do not approach the system with

open flames, as any escape from

the circuit may produce a lethal gas.

►

WARNING



Before starting the engine,

make sure the system is off

(by turning off the ventilation

fan) so as not to overload the

battery.



After the system at full power

for a long period of time, nev

er turn it off suddenly but let it

first idle for about 20 seconds.

RK37S,RK37SC-영문-06(바).indd 10

2017-01-13 오전 10:49:18

Summary of Contents for RK37 Hydrostatic























































































































































































Search results

Summary of Contents for RK37 Hydrostatic

Reviews:

Related manuals for RK37 Hydrostatic

Brands by name

Popular brands

Rural King RK37 Hydrostatic, Operator'S Manual

Search results

Summary of Contents for RK37 Hydrostatic

Reviews:

Related manuals for RK37 Hydrostatic

Brands by name

Popular brands