Rural King RK37 Hydrostatic Operator'S Manual Download Page 112

Page: 112 / 182

5 - 19

Maintenance and service

435

If the left and right brakes are

not operated simultaneously,

braking force is applied only to

one side, leading to a danger-

ous situation. Make sure to

adjust the left and right pedal's

play to the same level.
After adjustment, confirm the

operating state.

•

Warning

clutch pedal

brake pedal

0~30mm

30~0mm

prOper Free play OF

clutch/brake pedal

Press the pedal with a hand gently

to check its play.

►

<adjustment>

①

Unscrew the lock nut and turn

the adjusting nut to adjust the

play (left and right).

②

Turning it counterclockwise in-

creases the play while turning it

clockwise decreases the play.

③

A fter adjustment, tighten the lock

nut firmly.

RK37S,RK37SC-영문-05(마).indd 19

2018-12-11 오전 8:47:53

Summary of Contents for RK37 Hydrostatic























































































































































































Search results

Summary of Contents for RK37 Hydrostatic

Reviews:

Rural King RK37 Hydrostatic, Operator'S Manual, Page: 112 / 182

Search results

Summary of Contents for RK37 Hydrostatic

Reviews: