Rural King RK37 Hydrostatic Operator'S Manual Download

Page: 5 / 182

SAFETY PRECAUTIONS

2. ABOUT THIS MANUAL

This manual has been prepared to

assist you in following/adopting the

correct procedure for running-in op-

eration and maintenance of your

new

RK Tractors (

Here in after re-

fer to

) tractor.

Your tractor has been designed

and built to give maximum perfor-

mance, with good fuel economy and

ease of operation under a wide va-

riety of operating conditions. Prior

to delivery, The tractor was careful-

ly inspected, both at the factory and

by your

RK Tractor

store, to en-

sure that it reaches you in optimum

conditions .To maintain this condi-

tion and ensure trouble free perfor-

mance. it is important that the rou-

tine services, as specified in this

manual, are carried out at the rec-

ommended intervals.

Read this Manual carefully and

keep it in a convenient place for fu-

ture reference. If at any time you re-

quire advice concerning your trac-

tor, do not hesitate to contact your

Authorized

RK Tractor

store. He

has trained personnel, genuine

parts and necessary equipments to

undertake all your service require-

ments.
Manufacturer’s policy is one of con-

tinuous improvement, and the right

to change prices, specifications or

equipments at any time without no-

tice is reserved.
All data given in this book is sub-

ject to production variations. Dimen-

sions & weight are approximate only

and the illustrations do not neces-

sarily show tractors in standard con-

dition. For exact information about

any particular tractor, please consult

your

RK Tractor

store.

RK37S,RK37SC-영문-01A(안).indd 4

2018-12-06 오후 4:32:25

Summary of Contents for RK37 Hydrostatic























































































































































































Search results

Summary of Contents for RK37 Hydrostatic

Reviews:

Related manuals for RK37 Hydrostatic

Brands by name

Popular brands

Rural King RK37 Hydrostatic, Operator'S Manual

Search results

Summary of Contents for RK37 Hydrostatic

Reviews:

Related manuals for RK37 Hydrostatic

Brands by name

Popular brands