Rural King RK37 Hydrostatic Operator'S Manual Download Page 54

Page: 54 / 182

2 -

DESCRIPTION OF TRACTOR CONTROLS

HAzARD FLASHER SWITCH

This switch can be used to warn

other vehicles when malfunction oc-

curs in the tractor while driving on

a public road. When pressing the

switch once, the left and right haz-

ard warning lamps blink. Pressing

the switch again turns off the lamps.

►

(2) Turn signal lamp operation
The turn signal lamps can be op-

erated with the main switch in the

"ON" position.

(3) Horn

The horn can be operated with the

main switch in the "ON" position re-

gardless of the light switch.



Operating- Press the switch

sounds the horn.

This lever is not automatically

returned to the neutral position.

Therefore, set it back to the

neutral position after turn.

•

NOTE

Left turn

Turn the turn signal switch counter-

clockwise. Then, the left turn signal

lamp and the left turn signal indica-

tor on the instrument cluster blink.

Right turn

Push the turn signal switch clock-

wise. Then, the right turn signal

lamp and the right turn signal indi-

cator on the instrument cluster blink.

•

RH3O206A

Regen Disable S/W

Hazard flasher switch

Regen Req S/W

RK37S,RK37SC-영문-02(나).indd 7

2018-02-01 오후 2:51:13

Summary of Contents for RK37 Hydrostatic























































































































































































Search results

Summary of Contents for RK37 Hydrostatic

Reviews:

Rural King RK37 Hydrostatic, Operator'S Manual, Page: 54 / 182

Search results

Summary of Contents for RK37 Hydrostatic

Reviews: