40
sat.
The number of visible satellites. At least 4 satellites must be visible to
get an accurate GNSS signal.
hdop
The current HDOP (signal accuracy) level. If the HDOP level is above
3.5, the GNSS signal is inaccurate.
state
The current GNSS state. Possible values:
1 – GNSS module off
2 – GNSS module on, no fix
3 – GNSS module on, fix acquired
4 – GNSS module not responding
5 – GNSS module is in sleep mode
6 – GNSS module disabled
reset
When all else fails, use the
reset
SMS command to restart the device. Configuration parameters will not be
lost.
Command syntax:
password reset
Response example:
Resetting device
Summary of Contents for Trace5
Page 1: ...1 Trace5 User Manual ...
Page 22: ...21 Select your device in the device selection menu by clicking on it ...
Page 44: ...43 ...
