RUPTELA Trace5, User Manual

Page: 33 / 44

32
·
Custom -– configure parameters, to define how often the data
should be updated:
o
Ignition off (s) – set how often the location should be
updated when the ignition is off. Default value:
3600
s
o
Distance travelled (m) – set how far the vehicle
should travel to update the location. Default
value:
500
m
o
Ignition on (s) – set how often the location should be
updated when the ignition is on. Default value:
60
s
o
Angle turned (deg) – set how far the vehicle should
turn to update the location. Default value:
15
deg
Default value:
Medium
Stationary filter Discards inaccurate coordinates while the vehicle is not moving.
Default value: On
Active filter Discards inaccurate coordinates by evaluating the vehicle’s movement
speed.
Default value: On
Acceleration threshold (m/s 2 ) Used in the calculation of the maximum possible distance. If a new
coordinate is too far away from the previous one, it will be discarded.
Default value:
19.6 m/s
2
Accuracy filter Sets the coordinate accuracy. The higher the accuracy, the more
coordinates are filtered. We recommend using a lower accuracy, unless
you are sure the GNSS signal quality is excellent. Possible values:
·
Off
·
Low
(recommended)
·
Medium
·
High
Default value:
Off