RUNOW 6310CB, User Manual

Page: 24 / 31

20
mode.
(FIG 14) (FIG 15) (FIG 16)
9) TARGET TIME
：

Press” TARGET TIME” button ,enter into this mode , LCD will flash and display
TARGET& TIME .

LCD “TIME” window displays the presetting value1:00 or the last setting value.Press
“UP or DOWN”button to set (setting range 1:00~1:59:00), it is non-cyclic .

Press ENTER to confirm the Settings. The TIME symbol continues to flash while
counting down from the set point.

Press the "START" key once to enter the interrupt mode, and press "START" to
continue running..

Press the “STOP” button to sound the buzzer for 0.5s and enter into the stop mode.

If no signal input in 5Mins, buzzer rings for 0.5s and enters into stand by mode.

If the setting in 30s, the buzzer rings for 0.5s and back to standby mode.

If the result of movement is displayed, press “STOP” button to leave and return to
standby mode.