RUNOW 6310CB, User Manual

Page: 20 / 31

16
5)
Quick start :

In standby mode, with single RPM>20 input, quick press “START”,buzzer sound 0.5s,
then TIME
、
CALORIES
、
DISTANCE
、
WATTS
、
SPEED
、
& PACE shall light up in
sequence ,and starts counting according to the operation value.
(FIG 6)

”PULSE” ICON is lighten, if any heart rate loaded, the “PULSE” ICON will flash with
current value,if no heartbeat signal input,LCD will display “P”.

If there is no signal input within 5 minutes, the buzzer will sound for 0.5 seconds, and the
computer will return to the standby state.

If the setting is not completed within 30 seconds, the buzzer sounded for 0.5 seconds
and back to standby mode.

Press the "START" key once to enter the interrupt mode, and press “START” to continue
running.

Press the “STOP” button with the buzzer sounding for 0.5 seconds and then it will enter
into the stop mode.

If the result of movement is displayed, press “STOP” button to leave and return to
standby mode.

When adjust the adjustment button, it will display the LOAD resistance for each segment
in WATT window.