Runco LIGHTSTYLE LS-HB, Installation & Operation Manual, Page: 63 / 112

Operation
Runco LS-HB/LS-HB Ultra Installation/Operation Manual 47
PRE
L
IMINAR
Y
4.1
Selecting Video
Memory Press M1, M2 or M3 to recall settings from a memory preset. Then, press ENTER to
confirm your selection. Or, to cancel the operation, press to select Cancel and press
ENTER .
You can assign each of these three buttons to any of four
memory presets. For more information, refer to
M1 Key /
M2 Key / M3 Key on page 68.
4.2
Selecting an Aspect
Ratio Press the aspect ratio ( ) button to select the appropriate aspect ratio for the type of
program material being viewed.
4.3
Selecting An Input
Source When you turn on the LS-HB, it switches to the last
selected input and looks for a valid signal.
Use these buttons on the remote control to select an
input source directly. You can assign each of these five
buttons to any input. The default assignments are:
1 = HDMI 1, 2 = HDMI 2, 3 = Component, 4 = S-Video,
5 = Video.
For more information, refer to 1 Key / 2 Key / 3 Key / 4 Key / 5 Key on page 68.
4. Operation
M1 M2 M3
SHARP
USER MEMORY
1
4
2 3
5
▲
SOURCE