Runco LIGHTSTYLE LS-HB, Installation & Operation Manual, Page: 21 / 112

Controls and Functions
Runco LS-HB/LS-HB Ultra Installation/Operation Manual 5
PRE
L
IMINAR
Y
2.1
LS-HB at a Glance Figure 2-1 and Figure 2-2 show the key LS-HB components.
Figure 2-1. L S -HB Front/ S ide View
• TOP IR S EN S OR
Receives infrared signals from the remote control unit.
• POWER BUTTON/ S TATU S LED
Indicates projector status as follows:
• Solid green = AC power present, ready to turn on (lamp not lit)
• Flashing green = lamp is warming up or cooling down; keypad functions not allowed
• Off = Lamp lit, projector functioning normally
• Alternating green/red = Lamp problem (door open, unable to strike, end of life), user
intervention likely to fix problem
• Flashing red = Over temperature, user intervention (clear vents, turn on AC) may fix
problem
• Solid red = Error that requires servicing (fan fail, Power-on self-test fail etc.)
• EXHAU S T VENT
Warm air exits the projector through this vent. Ensure that it is not blocked.
• FOCU S RING
Rotate this to focus the projected image.
2. Control s and Function s
S y s tem
K eypad
Inta k e
Vent
Front
IR S en s or
Top IR S en s or
Power Button/
S tatu s LED
Exhau s t Vent
(on s ide)
Focu s Ring
Projection Len s
Zoom Ring