Runco LIGHTSTYLE LS-HB, Installation & Operation Manual, Page: 47 / 112

Installation
Runco LS-HB/LS-HB Ultra Installation/Operation Manual 31
PRE
L
IMINAR
Y
Adjusting the Projection
Angle If the screen is significantly higher or lower than the projector, you can also tilt the
projector at a slight angle. In a ceiling installation, you do this by adjusting the ceiling
mount.
For a floor installation, turn the adjustable feet at the bottom of the projector to adjust the
projection angle.
The projector can be rotated (side-to-side) up to 360 degrees and mounted without it
affecting performance. However, to ensure optimal performance of the lamp, limit the
front-to-back tilt of the projector to ±20 degrees; see Figure 3-7.
Figure 3-7. Mounting Angle Range s ( S ide-to- S ide and Front-to-Back)
If you do this, you may need to vertically shift the image to compensate. For detailed
instructions, refer to
Primary Lens Adjustments on page 41.
± 360º
± 20º