Ruijie RG-S6120 Series Switches Hardware Installation and Reference Guide
Figure 3-3 Installing Power Cord Retainer
Removing a RG-PA550I II-F Power Module
1)
Press the plug of the power module, Hold on to the module handle with one hand to pull out part of the module,
hold the bottom of it with the other hand, and pull out the power module uprightly and slowly.
2)
Install a blank panel in the power module slot and put the removed power module into its package.
Figure 3-10 Removing a Power Module
Remove the power module uprightly and slowly.
Install a blank panel in the location where the power module is removed to ensure the normal ventilation and
dissipation and avoid the dust in the chassis.
3.6.2 Installing and Removing RG-PA150I-F
Wear anti-static gloves before the following operations.
