Ruijie RG-S6120 Series Switches Hardware Installation and Reference Guide
Install the blank panel and put the removed fan module into its package
Figure 3-5 Removing an M1SFAN I-F Fan Module
Withdraw the fan module uprightly and slowly.
Install a blank panel on the location where a fan module is removed to ensure normal ventilation and dissipation
and avoid dust in the chassis.
3.6 Installing and Removing a Power Module
3.6.1 Installing and Removing RG-PA550I II-F
Wear anti-static gloves before the following operations.
Installing a RG-PA550I II-F Power Module
1)
Take a new power module out of the package and confirm the input mode and the input parameters of the power
module match the requirements.
2)
Remove the blank panel and take the plane printed with power information as the top panel of the power module.
Hold the handle of the power module with one hand, and hold the end of the power module with the other hand.
Insert it into the chassis along the guide rail uprightly and slowly until it clicks into place, and make sure that it is in
good contact with the power slot.
Figure 3-6 Installing a Power Module
