Hardware Installation and Reference Guide
Installation Troubleshooting
18
5
Installation Troubleshooting
5.1
Power Troubleshooting
You can check whether the power supply is faulty by observing the LEDs on the router. For the LED status, see
Chapter 1. If a fault occurs, check the following items:
Check whether the power cord is connected properly.
Check whether the power supply meets the requirements.
Caution
Do not attempt hot swapping of the power cord. If the steps above did not solve your problem, contact your
local distributor or technical support personnel.
5.2
System Troubleshooting
If the router is operational after power-on, you can visit the Web management system.
If you fails to log in to the Web management system, check the following items:
Check whether the power supply works normally.
Check whether the Ethernet cable is connected properly.
Check whether
Automatic (DHCP)
is enabled on the PC.
