Hardware Installation and Reference Guide
Installing the Router
12
墙上桩孔两个，孔间距
在30mm~38mm之间。
(2) Tap the two expansion anchors into the holes and make the outer edge of the anchors flush with the wall.
膨胀管压实入孔内。
(3) Attach the mounting bracket to the wall with its two holes aligned to the expansion anchors. Drive two screws
into the expansion anchors to secure the bracket on the wall.
Note
Ensure that the arrow symbol on the
bracket should point downwards (↓) when installing the bracket.
支架贴合墙壁并与墙上两孔居中对齐。
螺丝通过支架孔与膨胀管自攻固定支架。
注意箭头朝下。
(4) Gently slide the router onto the mounting bracket until it clicks into place.
Drill two holes on the wall with the center-to-center
distance of 30 mm (1.18 in.) to 38 mm (1.50 in.).
Tap the expansion anchors into the holes.
Attach the mounting bracket to the wall with its
two holes aligned to the expansion anchors.
Drive two screws into the anchors to secure the
bracket on the wall.
Downward Arrow
