4-29
Ruijie(config-ap)# ishare mode double frequency single stream
Scenario 2
:
FAT-AP
Ruijie(config)#interface Dot11radio 1/0
Ruijie(dot11-wlan-config)#antenna transmit 3
Ruijie(dot11-wlan-config)#antenna receive 3
Ruijie(dot11-wlan-config)#rate-set 11n mcs-support 7
Ruijie(dot11-wlan-config)#interface Dot11radio 2/0
Ruijie(dot11-wlan-config)#radio-type 802.11a
Ruijie(dot11-wlan-config)#antenna transmit 3
Ruijie(dot11-wlan-config)#antenna receive 3
Ruijie(dot11-wlan-config)#rate-set 11n mcs-support 7
Solution 3: Single-band single-stream mode (applicable to scenarios in which more rooms need to be covered and
the device performance needs to be utilized)
(In this mode, both radio cards work in 2.4 GHz mode, R1-2, R1-3, R2-2, and
R2-3 belong to radio card 1 whereas R1-0, R1-1, R2-0, and R2-1 belong to radio card 2. This mode supports only the single-
stream rate. Compared with the 1-to-8 scenarios supported in single-band single-stream mode of the first-generation i-Share
solution, this mode covers two more rooms. The maximum negotiated rate is 72.5 Mbps. This mode is mostly applied in
dormitory buildings in schools and similar scenarios.)
Scenario 1
:
FIT-AP
Ruijie(config)#ap-config xxx
Ruijie(config-ap)# ishare mode single frequency single stream
Scenario 2
:
FAT-AP
Ruijie(config)#interface Dot11radio 1/0
Ruijie(dot11-wlan-config)#antenna transmit 1
Ruijie(dot11-wlan-config)#antenna receive 1
Ruijie(dot11-wlan-config)#rate-set 11n mcs-support 7
Ruijie(dot11-wlan-config)#interface Dot11radio 2/0
Ruijie(dot11-wlan-config)#radio-type 802.11b
Ruijie(dot11-wlan-config)#antenna transmit 1
Ruijie(dot11-wlan-config)#antenna receive 1
Ruijie(dot11-wlan-config)#rate-set 11n mcs-support 7
Q16: CAPWAP Tunnel Establishment
If the
capwap ctr-ip x.x.x.x
command is configured on the AC, the CAPWAP address of the AC will be changed to another
address. This address needs to be delivered to the AP as the CAPWAP address.