4-19
WS6008(config)#ac-controller
WS6008(config-ac)#active-bin-file xxx.bin
WS6008(config-ac)#ap-image auto-upgrade
View the update status.
WS6008#sh ap-config updating-list
Q7: Implementation of the Bonjure Protocol
[Scenario Description]
Apple TV------Switch------AP (iPad/iPhone is connected to the AP in wireless mode and the Bluetooth function is enabled.)
[Implementation Effect]
The screen of the iPad or iPhone can be projected onto Apple TV.
[Support on Ruijie Products]
1. In the Layer-2 forwarding environment, Apple TV is in the same network segment as the iPad/iPhone. The multicast
function (IGMP snooping) can be configured on the AC/fat AP directly so that the screen of the iPad or iPhone can be
projected onto Apple TV.
2. In the Layer-3 forwarding environment, Apple TV is in a different network segment from the iPad/iPhone. The multicast
function and the Bonjour protocol need to be configured on the AC/fat AP so that the screen of the iPad or iPhone can be
projected into Apple TV.
Implementation on Cisco AC/AP for Reference:
http://www.cisco.com/c/en/us/support/docs/wireless/aironet-1100-series-access-point/113443-cuwn-apple-bonjour-dg-
00.html
http://www.cisco.com/c/en/us/support/docs/wireless/aironet-1100-series-access-point/113443-cuwn-apple-bonjour-dg-
00.html#configcontr
Q8: Precautions for the Band-select Function
If a WLAN is associated with only one radio card (2.4 GHz/5 GHz), do not enable the band-select function on the WLAN.
Otherwise, the signals become unstable.
Q9: Restoring Factory Defaults on the Fit AP
Note: If an address is manually configured for the fit AP, the following command needs to be executed to restore factory defaults:
