4-33
//In AP-group mode, run the exec-cmd command to change the country code.
WS6008(config-group)#exec-cmd country US radio 2
Q24: Disabling APMG Information Function
In fault locating, information of APMG Level 6 may affect the debug command. To prevent this problem, disable APMG Level
6 manually.
WS6008(config)#*Dec 15 17:24:55: %APMG-6-STA_ADD: Client(ec26.cae1.1999) notify: attach to AP (AP01).
WS6008(config)#*Dec 15 17:24:55: %APMG-6-STA_UPDT: User Online, MAC Address: ec26.cae1.1999, AP Name
AP01, base radio MAC: 0069.6c5c.69c1, IP address: 172.29.6.135, SSID: vlan-group.
Before fault locating, ensure that the following commands are executed:
terminal monitor
logging console 7 or logging monitor 7
Run the following command to disable APMG Level 6:
WS6008#debug stamg func syslog disable
Note:
After debugging is complete, run the
enable
command to enable APMG Level 6.
Q25: The WS5302 Upgrade Fails Because of Insufficient Memory Space
1. Fault Symptom
The dir command executed on the WS5302 shows that there is only 4 MB available space in the memory. The WS5302 cannot
be upgraded to version 5B6 and an error as shown in the following figures is displayed.
