Cutting Centre SR 2 BiTurbo
17
Use of lubricants
–
Others
•
Synthetic high-performance lubricant TEROSON VR 500 / PLASTI-
LUBE, based on super-refined mineral oils, free from metallic
soaps or fatty acids
Protective equipment:
Protective gloves (EN 374), eye protection (EN 166),
breathing mask (EN 14387), protective clothing (EN 14605)
➢
Lifting aid chain (inside)
[The information on the proposed personal protective equipment has
only an advisory function. A full risk assessment should be carried out
before using the product to assess whether the indicated personal pro-
tective equipment is suitable for local conditions. Personal protective
equipment should conform to the relevant EU standards.]
5.1
Regular care
Regular care of the machine must be carried out at least once per
week. This prevents malfunctions and signs of wear.
Any abnormalities detected during regular care must be reported to
the supervisor! The supervisor must immediately initiate correction or
maintenance or notify Rühle Service!
Care schedule:
a)
Disassemble the machine according to the cleaning instruc-
tions. Check for any parts moving with difficulty, material
abrasion or other signs of wear and tear.
b)
Remove the cut-off knives with the knife sharpener and
check them for any damage or broken blades.
c)
Sharpen the grate knives in the knife levels with the knife
sharpener and check them for any damage or broken blades.
Grate knives must be resharpened at least every 50 work-
ing hours on a slip-resistant underlay using only little
pressure and a Rühle knife sharpener!
