Ruckus Wireless ZoneDirector User Guide | Managing a Wireless Local Area Network
38
5
When the RF scan is complete and ZoneDirector has recalibrated the Map View, you
can assess your changes, and make further adjustments as needed.
Assessing current performance by using the Access Point table
1
Go to
Monitor
>
Access Points
.
2
When the
Access Points
page appears, review the
Currently Active APs
for specific AP
settings, especially the
Channel
and
Clients
columns.
3
If you want to make changes to individual AP settings, proceed to the next task.
Adjusting AP Settings
1
Go to
Configure
>
Access Points
.
2
Review the
Access Points
table and identify an AP that you want to adjust.
3
Click the
Edit
button in that AP row.
4
Review and adjust any of the following Editing (AP) options:
MAC Address
This information is taken from the AP. It cannot be modified in
ZoneDirector.
Description
Enter a short description of this device and its current location.
Radio B/G Channel
Choose a specific channel for use by 802.11b/g devices from
this drop-down list.
TX Power
Choose the amount of power allocated to this channel. The
default setting is “Auto” and your options range from “Full” to
“1/8”.
5
Click
OK
. The adjusted AP will be automatically restarted, and when it is active, will
be ready for network connections.
NOTE
Some options are read-only depending on the approval status.
