Ruckus Wireless ZoneDirector User Guide | Managing a Wireless Local Area Network
33
Reviewing the Current Access Point Policies
The Access Point Policy options include how new APs are detected and approved for use in
WLAN coverage. To review and revise the general AP policy, follow these steps:
1
Go to
Configure
>
Access Points
.
2
Review the current settings in
Access Point Policies
. You can change the following:
Approval
If you prefer, you can deactivate this option if you want to manually
review and approve the joining of new APs to the WLAN.
3
Click
Apply
to save your settings. This will affect only new/unapproved APs.
FIGURE 3-7
Editing Access Point Parameters
You can add a description, or change the channelization, channel, or transmit power set-
tings of a managed access point by editing the APs parameters.
To edit the parameters of an access point, do the following:
1
Go to
Configure
>
Access Points
.
2
Find the AP to edit in the
Access Points
table, then click
Edit
under the
Action
column.
3
Edit any of the following:
Description
Enter a description for the AP, such as the location.
Channelization
(For 802.11n only) The “channel width” determines the manner
in which the spectrum is used during transmission.
Channel
This is the channel used by the APs network.
