Configuring the share queue level for an egress buffer profile
The share level is the maximum number of buffers that a priority group (PG) can use as a portion of the total sharing pool.
NOTE
Configuration of the egress buffer share queue level is supported only on Ruckus ICX 7250, ICX 7450, ICX 7650, and ICX 7750
devices.
Follow these steps to configure the egress buffer share queue level.
1. Enter global configuration mode.
device# configure terminal
2. Configure the share level.
device(config)# qos egress-buffer-profile egress1 queue-share-level level3-1/16 7
3. Return to privileged EXEC mode.
device(config)# exit
4. Verify the configuration
device# show qos egress-buffer-profile egress1
Egress Buffer Profile: egress1
Ports attached: --
Per Queue Details: Share Level:
Queue 0 level5-1/5
Queue 1 level4-1/9
Queue 2 level4-1/9
Queue 3 level4-1/9
Queue 4 level4-1/9
Queue 5 level4-1/9
Queue 6 level4-1/9
Queue 7 level3-1/16
5. Save the configuration.
device# write memory
Share queue level for an egress buffer profile configuration example
device# configure terminal
device(config)# qos egress-buffer-profile egress1 queue-share-level level3-1/16 7
device(config)# exit
device# show qos egress-buffer-profile egress1
device# write memory
Configuring the share port level for an egress buffer profile
The share port level for an egress buffer profile defines the maximum number of buffers that a port can use as a portion of the total memory.
NOTE
The configuration of the egress buffer share port level is supported only on the Ruckus ICX 7150. For the Ruckus ICX 7250, ICX
7450, ICX 7650, and ICX 7750 devices, you can change the queue share level for an individual queue which has a finer granularity
than the port share level for an individual port.
Quality of Service
Configuring QoS
Ruckus FastIron QoS and Traffic Management Configuration Guide, 08.0.70
Part Number: 53-1005294-01
47
