Traffic Class 4 0%
Traffic Class 5 0%
Traffic Class 6 0%
Traffic Class 7 0%
Changing a port priority
Follow these steps to change the QoS priority of a specific port.
1. Enter global configuration mode.
device# configure terminal
2. Enter interface configuration mode.
device(config)# interface ethernet 1/1/1
3. Set the port priority.
device(config-if-e1000-1/1/1)# priority 7
This step assigns priority 7 to untagged switched traffic received on port 1/1/1.
4. Return to privileged EXEC mode.
device(config-if-e1000-1/1/1)# end
5. Verify the configuration.
device# show interface brief
Port Link State Dupl Speed Trunk Tag Pvid Pri MAC Name
1/1/1 Down None None None None Yes 4000 7 cc4e.248b.b050 ERSPAN
1/1/2 Down None None None None No 5 0 cc4e.248b.b050
1/1/3 Down None None None None No 5 0 cc4e.248b.b052
1/1/4 Down None None None None No 5 0 cc4e.248b.b053
1/1/5 Down None None None 2 Yes N/A 0 cc4e.248b.b054
...
The interface priority is listed under the heading
Pri
.
Changing a port priority configuration example
device# configure terminal
device(config)# interface ethernet 1/1/1
device(config-if-e1000-1/1/1)# priority 7
device(config-if-e1000-1/1/1)# end
device# show interface brief
Assigning static MAC entries to priority queues
Follow these steps to configure a static MAC entry and assign the entry to the premium queue.
By default, all MAC entries are in the best-effort queue. When you configure a static MAC entry, you can assign the entry to a higher QoS
level.
1. Enter global configuration mode.
device# configure terminal
Quality of Service
Configuring QoS
Ruckus FastIron QoS and Traffic Management Configuration Guide, 08.0.70
Part Number: 53-1005294-01
31
