5. Display information about QoS profiles.
device# show qos-profiles all
bandwidth scheduling mechanism: mixed weighted priority with strict priority
Unicast Traffic
Profile qosp7: Priority7(Highest) Set as strict priority
Profile qosp6: Priority6 Set as strict priority
Profile qosp5: Priority5 bandwidth requested 20% calculated 20%
Profile qosp4: Priority4 bandwidth requested 15% calculated 15%
Profile qosp3: Priority3 bandwidth requested 15% calculated 15%
Profile qosp2: Priority2 bandwidth requested 20% calculated 20%
Profile qosp1: Priority1 bandwidth requested 15% calculated 15%
Profile qosp0: Priority0(Lowest) bandwidth requested 15% calculated 15%
Multicast Traffic
Profile qosp7+qosp6 : Priority7(Highest),6 Set as strict priority
Profile qosp5+qosp4+qosp3+qosp2: Priority5,4,3,2 bandwidth requested 70% calculated 70%
Profile qosp1+qosp0 : Priority1,0(Lowest) bandwidth requested 30% calculated 30%
6. Save the configuration.
device# write memory
Allocate bandwidth for hybrid WRR and SP queues configuration example
device# configure terminal
device(config)# qos profile qosp7 sp qosp6 sp qosp5 20 qosp4 15 qosp3 15 qosp2 20 qosp1 15 qosp0 15
device(config)# exit
device# show running-config | include qos
device# write memory
Enabling priority flow control globally
Follow these steps to enable PFC globally.
NOTE
PFC is supported only on Ruckus ICX 7250, ICX 7450, and ICX 7750 devices.
1. Enter global configuration mode.
device# configure terminal
2. Enable PFC globally.
device(config)# priority-flow-control enable
3. Return to privileged EXEC mode.
device(config)# exit
4. Verify the configuration.
device# show priority-flow-control
Global PFC Status: Enabled
PFC Disabled on PG0
PFC Disabled on PG1
PFC Enabled on PG2
PFC Disabled on PG3
5. Save the configuration.
device# write memory
Quality of Service
Configuring QoS
Ruckus FastIron QoS and Traffic Management Configuration Guide, 08.0.70
42
Part Number: 53-1005294-01
