4. Verify the configuration
device# show qos scheduler-profile all
User Scheduler Profile: test Scheduling Option: Mixed-SP-WRR
Ports attached: (U1) --
Ports attached: (U2) --
Ports attached: (LAG) --
Ports attached: (LAG) --
Unicast per Queue details: Bandwidth%
Traffic Class 0 15%
Traffic Class 1 15%
Traffic Class 2 15%
Traffic Class 3 15%
Traffic Class 4 15%
Traffic Class 5 25%
Traffic Class 6 sp
Traffic Class 7 sp
Multicast per Queue details: Bandwidth%
Traffic Class 0 15%
Traffic Class 1 15%
Traffic Class 2 15%
Traffic Class 3 15%
Traffic Class 4 15%
Traffic Class 5 25%
Traffic Class 6 sp
Traffic Class 7 sp
Minimum Guaranteed Rate: Bandwidth%
Unicast per Queue details: Bandwidth%
Traffic Class 0 0%
Traffic Class 1 0%
Traffic Class 2 0%
Traffic Class 3 0%
Traffic Class 4 0%
Traffic Class 5 0%
Traffic Class 6 0%
Traffic Class 7 0%
5. Save the configuration.
device# write memory
Select the QoS queuing method configuration example
device# configure terminal
device(config)# qos mechanism mixed-sp-wrr
device(config)# exit
device# show qos scheduler-profile all
device# write memory
Remarking configuration considerations and limitations
•
When an ACL is configured on a port without remarking and global DSCP remarking is enabled, the global DSCP remarking is
enabled for the permitted traffic.
•
DSCP and CoS global remarking are supported on the same interface together.
•
DSCP and CoS global remarking cannot coexist with MAC filters and MAC-based VLANs.
The following table summarizes the behavior when the remarking is set.
Quality of Service
DSCP and CoS global re-marking
Ruckus FastIron QoS and Traffic Management Configuration Guide, 08.0.70
Part Number: 53-1005294-01
21
