Ruckus Wireless Ruckus ICX 7150 Series Configuration Manual Download Page 20 | Manualshive

Page: 20 / 65

Ruckus Wireless Ruckus ICX 7150 Series Configuration Manual Download Page 20

The DSCP and CoS re-marking can be configured through the command-line interface (CLI) at the global level and the interface level. The
global DSCP and CoS marking can coexist with other security features configured on the same port. The coexistence rules are the same as
those for IPv4 ACLs.

Selecting the QoS queuing method

Follow these steps to change the queuing method.

By default, Ruckus devices use the weighted round robin (WRR) method of packet prioritization.

1. Enter global configuration mode.

device# configure terminal

2. Select the QoS queuing method.

•

Change the queuing method to strict priority (SP).

device(config)# qos mechanism strict

bandwidth scheduling mechanism: strict priority

Qos profile bandwidth percentages are ignored

•

Change the queuing method to mixed SP and WRR.

device(config)# qos mechanism mixed-sp-wrr

bandwidth scheduling mechanism: mixed weighted priority with strict priority

Unicast Traffic

Profile qosp7 : Priority7(Highest) Set as strict priority

Profile qosp6 : Priority6 Set as strict priority

Profile qosp5 : Priority5 bandwidth requested 25% calculated 25%

Profile qosp4 : Priority4 bandwidth requested 15% calculated 15%

Profile qosp3 : Priority3 bandwidth requested 15% calculated 15%

Profile qosp2 : Priority2 bandwidth requested 15% calculated 15%

Profile qosp1 : Priority1 bandwidth requested 15% calculated 15%

Profile qosp0 : Priority0(Lowest) bandwidth requested 15% calculated 15%

Multicast Traffic

Profile qosp7 : Priority7(Highest) Set as strict priority

Profile qosp6 : Priority6 Set as strict priority

Profile qosp5 : Priority5 bandwidth requested 25%

calculated 25%

Profile qosp4 : Priority4 bandwidth requested 15%

calculated 15%

Profile qosp3 : Priority3 bandwidth requested 15%

calculated 15%

Profile qosp2 : Priority2 bandwidth requested 15%

calculated 15%

Profile qosp1 : Priority1 bandwidth requested 15%

calculated 15%

Profile qosp0 : Priority0(Lowest) bandwidth requested 15%

calculated 15%

Observe that the verification step is not necessary with either of these choices.

3. Return to privileged EXEC mode.

device(config)# exit

Quality of Service
DSCP and CoS global re-marking

Ruckus FastIron QoS and Traffic Management Configuration Guide, 08.0.70

20

Part Number: 53-1005294-01

«
...
18
19
20
21
22
...
»

Summary of Contents for Ruckus ICX 7150 Series


































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands